Dropped kerbs in Walsall

What Walsall Metropolitan Borough Council charges, its rules for driveways, and where to apply.

Application
£170
council builds
Application
£170
own contractor
Works licence
£140
council builds
Works licence
£540
own contractor
Min. depth
4.8m
Max. width
6.3m

Tap a figure for its source, fee year and the date we checked it.

Work out my costs

Walsall's fees

Who builds it?
Along the kerb, including the sloping kerbs at each end. Optional.
Crossing width × pavement width, if you know it. Optional.
Anything else?

Walsall Metropolitan Borough Council

The council builds it

You pay at least£310

The council doesn't say whether VAT is included.

Plus

  • Building the dropped kerb: no fixed price (the council only gives a guide)
  • Application fee
    £170
    • Per application
    • VAT not stated
    go.walsall.gov.uk, checked 16 November 2026 · No fee year stated
    The council's words
    “pay a non-refundable assessment fee of £170.00”
  • Works licence or permit
    £140
    • Per road opening permit (council's contractor route)
    • VAT not stated
    go.walsall.gov.uk, checked 16 November 2026 · No fee year stated
    The council's words
    “Pay the permit fee of £140.00”
  • Building the dropped kerbNot a price
    Not a price: the council's rough guide is about £1,750
    • Per standard crossing (3 kerbs + 2 tapers, 1.5-2.0m footway)

    Not included in the total

    go.walsall.gov.uk, checked 16 November 2026 · No fee year stated
    The council's words
    “Cost £1,750.00 (approx) £2,000 (approx)”

Refunds

The application fee is not refunded if your application is refused.

go.walsall.gov.uk, checked 16 November 2026 · No fee year stated
The council's words
“pay a non-refundable assessment fee of £170.00”

Walsall's rules

  • Depth of your driveway

    The council's minimum is 4.8m.

    The council's words
    “constructed to a minimum of 4.8 metres long, measured from the front of your house to the boundary of your property”
    go.walsall.gov.uk, checked 16 November 2026
  • Maximum width

    Council limit: 6.3m, measured along the kerb, including the sloping kerbs at each end.

    The council's words
    “maximum of 5 dropped kerbs and 2 tapers, with an overall width of 6.3 metres”
    go.walsall.gov.uk, checked 16 November 2026

Other layout rules

Driveway/hardstanding at least 4.8m long (front of house to property boundary) and 2.8m wide, built to existing footway level before the crossing is installed. Standard crossing 4.5m (3 kerbs + 2 tapers); max 6.3m. Applications may be refused at a junction, on a sharp bend, or close to traffic signals or pedestrian crossings. Crossing a grass verge owned by a housing group or the council's Asset Management team needs written permission or an easement agreement.

go.walsall.gov.uk, checked 16 November 2026

Trees

A dropped crossing cannot be installed within 1 metre of a highway tree. Removal may be considered (not always granted, especially mature trees); if removed, two replacement trees are required at the applicant's cost. Applications near trees are referred to Clean & Green Services.

go.walsall.gov.uk, checked 16 November 2026

Lamp posts and street furniture

Street lighting column relocation quoted by the council's contractor (Amey); bus stop pole moves agreed with Transport for West Midlands; relocation costs met by the applicant and included in the quotation. Minor utility box work by the council's contractor is included in the quote, but BT, Virgin Media or National Grid boxes must be moved by those companies at the applicant's cost.

go.walsall.gov.uk, checked 16 November 2026

Driving over the kerb without permission

Driving over a footway without a properly constructed dropped crossing (bumping up kerbs, or wood/concrete in the kerb line) is illegal, and the council 'will consider enforcement action'. Web page: 'If you drive over a pavement that doesn't have a dropped kerb, you're breaking the law.'

go.walsall.gov.uk, checked 16 November 2026

When the council says you need planning permission

  • Property on a classified road
  • Property in a conservation area
  • House divided into flats
go.walsall.gov.uk, checked 16 November 2026

Check your driveway against these rules

From your house to the back of the pavement.
The same width as in the cost calculator above.
Type of crossing
Is your house on a classified road (an A, B or C road)?
Is it in a conservation area, or a listed building?

Enter your measurements to check them against Walsall Metropolitan Borough Council's rules.

  • Depth of your drivewayEnter your depth to check

    The council's minimum is 4.8m.

    “constructed to a minimum of 4.8 metres long, measured from the front of your house to the boundary of your property”
    go.walsall.gov.uk, checked 16 November 2026
  • Maximum widthEnter your width to check

    Council limit: 6.3m, measured along the kerb, including the sloping kerbs at each end.

    “maximum of 5 dropped kerbs and 2 tapers, with an overall width of 6.3 metres”
    go.walsall.gov.uk, checked 16 November 2026
  • Classified (A, B or C) roadTell us if this applies to you
    “Property on a classified road”
    go.walsall.gov.uk, checked 16 November 2026
  • Conservation area or listed buildingTell us if this applies to you
    “Property in a conservation area”
    go.walsall.gov.uk, checked 16 November 2026

Applying to Walsall

Who builds it
The council's own contractor builds it. Or you can use your own contractor, who needs a licence from the council.
go.walsall.gov.uk, checked 16 November 2026
How long it takes
Assessment decision within three weeks. Private contractor permit applications at least 28 days before works start.
go.walsall.gov.uk, checked 16 November 2026

Apply on the council's website

Sources

Every page we used from Walsall Metropolitan Borough Council's website, checked on 16 November 2026.