Dropped kerbs in Sheffield
What Sheffield City Council charges, its rules for driveways, and where to apply.
- Max. width
- 6.3m
Tap a figure for its source, fee year and the date we checked it.
Sheffield's fees
Sheffield City Council
A contractor from the council's approved list builds it
You pay at least£220
The council doesn't say whether VAT is included.
Plus
- Building the dropped kerb: priced by quote
- Application fee£220
- Per domestic application
- VAT not stated
sheffield.gov.uk, checked 15 November 2026 · Fee year 2026The council's words
“The Application fee is £220. This is an administration fee only, which is non-refundable should your application be refused.”
- Building the dropped kerbPriced by quote
Refunds
The application fee is not refunded if your application is refused.
The council's words
“The Application fee is £220. This is an administration fee only, which is non-refundable should your application be refused.”
Other charges the council lists
These may or may not apply to you, so they aren't in the total.
- Light industrial crossing application fee£230
- Per light industrial application
- VAT not stated
sheffield.gov.uk, checked 15 November 2026 · No fee year statedThe council's words
“We charge £220 for domestic applications and £230 for light industrial applications.”
- Copy of certificate of permission£40
- Per copy
- VAT not stated
sheffield.gov.uk, checked 15 November 2026 · No fee year statedThe council's words
“Copies of previously granted permission can be provided for a fee of £40.”
- H marking application assessment fee£128
- Per H marking application
- VAT not stated
sheffield.gov.uk, checked 15 November 2026 · No fee year statedThe council's words
“£128 application fee”
Sheffield's rules
Depth of your driveway
Not published by the council
Maximum width
Council limit: 6.3m, measured along the kerb, including the sloping kerbs at each end.
The council's words
“the maximum width for any one access is 6.3 metres (including taper kerbs and your existing crossing)”
sheffield.gov.uk, checked 15 November 2026
Other layout rules
Standard single crossing 4.5m and double 6.3m, both including taper kerbs (form Q5). Form Q6 asks 'Is the parking area less than 5m long, measured at right angles to the highway?' and points to a diagram, but does not state a minimum depth in words. At least 10m from any road junction (15m on major roads/busy junctions). At least 1m from a bus stop. A 2m clear line of sight to the left and right is considered. Verge/footway gradient steeper than 1 in 6 may not be approved. Parking area must not drain onto the highway (soakaway or permeable surface); loose chippings/unbound surface materials are not permitted. Access rights of others must be declared.
Trees
To provide a root protection area, the distance from the tree trunk to the start of the lowered kerb must be greater than the circumference of the tree trunk x 4.
Lamp posts and street furniture
The crossing must be at least 1m from street lighting columns, BT poles and other street furniture. Where ironworks such as manhole covers are in the footway or verge, the applicant may need to contact the utility company.
When the council says you need planning permission
- Classified road
- Conservation area
- Listed building
Check your driveway against these rules
Enter your measurements to check them against Sheffield City Council's rules.
- Depth of your drivewayNot published by the council
- Maximum widthEnter your width to check
Council limit: 6.3m, measured along the kerb, including the sloping kerbs at each end.
“the maximum width for any one access is 6.3 metres (including taper kerbs and your existing crossing)”
sheffield.gov.uk, checked 15 November 2026 - Classified (A, B or C) roadTell us if this applies to you
“Classified road”
sheffield.gov.uk, checked 15 November 2026 - Conservation area or listed buildingTell us if this applies to you
“Conservation area”
“Listed building”
sheffield.gov.uk, checked 15 November 2026
Applying to Sheffield
- Who builds it
- A contractor from the council's approved list builds itsheffield.gov.uk, checked 15 November 2026
- How long it takes
- 'Our current turnaround time for applications is around 10 weeks.' The form says it can take around 10 weeks from receipt to notification of the decision. A 12-month maintenance period applies after completion.sheffield.gov.uk, checked 15 November 2026
- Approved contractors
- The council's list
Sources
Every page we used from Sheffield City Council's website, checked on 15 November 2026.
- https://www.sheffield.gov.uk/parking/request-adjustments/request-dropped-kerb
- https://www.sheffield.gov.uk/sites/default/files/2026-07/domestic_vehicular_crossing_application_-_2026.docx
- https://www.sheffield.gov.uk/sites/default/files/2026-01/light-industrial-vehicular-application-2025.docx
- https://www.sheffield.gov.uk/sites/default/files/2023-01/vc-contractors-list-jan-23.pdf
- https://www.sheffield.gov.uk/parking/request-adjustments/request-h-road-markings
- https://www.sheffield.gov.uk/sites/default/files/2025-07/h_markings_application_and_guidance_2025.doc
- https://www.sheffield.gov.uk/parking/apply-parking-permit
- https://www.sheffield.gov.uk/parking/apply-parking-permit/resident-parking-permits