Dropped kerbs in Essex

What Essex County Council charges, its rules for driveways, and where to apply.

Works licence
£150
2026-27
Min. depth
5m
Max. width
4.5m
9m if shared

Tap a figure for its source, fee year and the date we checked it.

Work out my costs

Essex's fees

Along the kerb, including the sloping kerbs at each end. Optional.
Crossing width × pavement width, if you know it. Optional.
Anything else?

Essex County Council

A contractor you choose builds it, with a licence from the council

Total of the charges the council publishes£442.11

Uses the higher of two council figures until the council confirms.

Some figures include VAT and some are before VAT.

Plus

  • Building the dropped kerb: priced by quote
  • Application feeConfirm with the council
    £292.11 or £210.18
    • The council's own pages disagree: £292.11 (fees schedule, fee year 2026-27) and £210.18 (fees page, fee year 2026-27). Confirm with the council.
    • The total uses the higher figure, £292.11, until the council confirms.
    • Per application (processing)
    essex.gov.uk, checked 16 November 2026 · Fee year 2026-27
    The council's words
    “Standard Vehicle Crossing Fee Cost for processing Discretionary £281.96 £292.11 3.6%”
    Second council source: essexhighways.org, checked 16 November 2026 · Fee year 2026-27
    The council's words
    “.vxng-cost::after { font-weight: 700; content: "210.18"; }”
  • Works licence or permit
    £150
    • Per Road Opening Notice (application to implement, works with excavation)
    • No VAT
    • Paid by your contractor (usually passed on in their price).
    essexhighways.org, checked 16 November 2026 · Fee year 2026-27
    The council's words
    “.vxng-road-opening::after { font-weight: 700; content: "150.00"; }”
  • Building the dropped kerb
    Priced by quote

Refunds

The application fee is not refunded if your application is refused.

essexhighways.org, checked 16 November 2026 · No fee year stated
The council's words
“The fee is non-refundable and covers a site visit, a search of underground apparatus (i.e. gas, electric) and administration processes.”

Other charges the council lists

These may or may not apply to you, so they aren't in the total.

  • Replacement tree planting charge (highway tree removed for a vehicle crossover)
    £1,374.12
    • Per tree
    • VAT not stated
    essex.gov.uk, checked 16 November 2026 · Fee year 2026-27
    The council's words
    “Replacement tree planting charge where approval is given for the removal of a highway tree to support a”
  • Temporary Traffic Regulation Order (if a road closure or diversion is needed for the works)
    £1,526.86
    • Per order
    • VAT not stated
    essex.gov.uk, checked 16 November 2026 · Fee year 2026-27
    The council's words
    “Temp Road Closure (TTRO) Cost for advertising and consulting on TRO Discretionary £1,473.80 £1,526.86”
  • Administration charge on relocating street furnitureFormula
    20% of cost of relocating street furniture plus all costs of the relocation
    • Per relocation
    • VAT not stated
    essexhighways.org, checked 16 November 2026 · No fee year stated
    The council's words
    “the Householder must pay for all costs including a 20% administration charge to cover the cost of ordering and inspecting the works from our contractor”

Essex's rules

  • Depth of your driveway

    The council's minimum is 5m.

    The council's words
    “The parking space (within your own property) for your vehicle must have a depth of 5 metres (at approximately right angles to the road) by a width of 2.5 metres.”
    essexhighways.org, checked 16 November 2026
  • Minimum width (single crossing)

    Council limit: 3.6m, measured along the kerb.

    The council's words
    “The width of your vehicle crossing, for a single property, is between 4 to 5 drop kerb lengths (3.6 to 4.5 metres)”
    essexhighways.org, checked 16 November 2026
  • Maximum width (single crossing)

    Council limit: 4.5m, measured along the kerb.

    The council's words
    “The width of your vehicle crossing, for a single property, is between 4 to 5 drop kerb lengths (3.6 to 4.5 metres)”
    essexhighways.org, checked 16 November 2026
  • Minimum width (shared crossing)

    Council limit: 7.2m, measured along the kerb.

    The council's words
    “the width is 8 to 10 drop kerb lengths in total (7.2 to 9.0 metres)”
    essexhighways.org, checked 16 November 2026
  • Maximum width (shared crossing)

    Council limit: 9m, measured along the kerb.

    The council's words
    “the width is 8 to 10 drop kerb lengths in total (7.2 to 9.0 metres)”
    essexhighways.org, checked 16 November 2026

Width, in the council's words

“The width of your vehicle crossing, for a single property, is between 4 to 5 drop kerb lengths (3.6 to 4.5 metres) and 2 ramp kerbs (1.8 metres).”
essexhighways.org, checked 16 November 2026
“If your vehicle crossing is shared with your neighbour’s vehicle crossing then the width is 8 to 10 drop kerb lengths in total (7.2 to 9.0 metres) and 2 ramps (1.8 metres), 4 to 5 drop kerb lengths in front of each property.”
essexhighways.org, checked 16 November 2026
“we will only allow to have no more than 1.8 metres of dropped distance for this type of access.”
essexhighways.org, checked 16 November 2026

Other layout rules

Parking space within the property 5m deep (approximately at right angles to the road) by 2.5m wide; no crossing if the frontage depth is under 5m; no reduced size for small cars; parallel parking not accepted (vehicles must enter/exit at right angles, ±10 degrees). A second crossing is possible on unclassified roads with at least 5m of full-height kerb between the two. Must be in a safe position with adequate visibility; likely refused if it interferes with bus stops, pedestrian crossings, disabled parking bays, crosses large verges or ornamental areas, removes mature trees or is in a lay-by (lay-bys case by case). Applicant must show control of the land between the property and the highway. Crossings over a watercourse or pipe must be piped or bridged. Gates must be 6m from the edge of the highway. Gradients and junction radii assessed case by case. No surface water from private property onto the highway. Minimum 450mm clearance between the crossing and any street furniture (terms and conditions). Not available where there is a disabled parking bay.

essexhighways.org, checked 16 November 2026

Trees

Tree removal is decided by the local tree officer, consulted during the initial inspection (after the fee is paid); applications take longer. If a crossing cannot be accommodated without a detrimental impact on a mature or important tree, permission may be declined. Trees count as street furniture; relocation needs specialist advice from ECC tree specialists. Replacement tree planting is charged where removal is approved (shown under the council's other charges).

essexhighways.org, checked 16 November 2026

Lamp posts and street furniture

Minimum 450mm clearance between the crossing and any street furniture. Where relocation is necessary the Highway Authority arranges it and the householder pays all costs plus a 20% administration charge, in advance. Lighting columns: decided by the Street Lighting Team during the initial inspection. Statutory undertakers' apparatus: protection/lowering costs borne by the householder in advance; utilities may insist on doing the work. Bus stops: allowed if the crossing does not conflict with a shelter, pole or raised kerbs.

essexhighways.org, checked 16 November 2026

When the council says you need planning permission

  • Location on a classified road (A, B or Class III road) - planning permission needed before applying
  • Local conditions such as a covenant - check with the local council planning department
  • Harlow: 'open front parking' consent required
See all 4 conditions
  • Epping Forest: council tenants and freehold/leasehold owners of former council property need consent for 'off street garden parking'
essexhighways.org, checked 16 November 2026

Check your driveway against these rules

From your house to the back of the pavement.
The same width as in the cost calculator above.
Type of crossing
Is your house on a classified road (an A, B or C road)?
Is it in a conservation area, or a listed building?

Enter your measurements to check them against Essex County Council's rules.

  • Depth of your drivewayEnter your depth to check

    The council's minimum is 5m.

    “The parking space (within your own property) for your vehicle must have a depth of 5 metres (at approximately right angles to the road) by a width of 2.5 metres.”
    essexhighways.org, checked 16 November 2026
  • Minimum width (single crossing)Enter your width to check

    Council limit: 3.6m, measured along the kerb.

    “The width of your vehicle crossing, for a single property, is between 4 to 5 drop kerb lengths (3.6 to 4.5 metres)”
    essexhighways.org, checked 16 November 2026
  • Maximum width (single crossing)Enter your width to check

    Council limit: 4.5m, measured along the kerb.

    “The width of your vehicle crossing, for a single property, is between 4 to 5 drop kerb lengths (3.6 to 4.5 metres)”
    essexhighways.org, checked 16 November 2026
  • Classified (A, B or C) roadTell us if this applies to you
    “Location on a classified road (A, B or Class III road) - planning permission needed before applying”
    essexhighways.org, checked 16 November 2026

Applying to Essex

Who builds it
A contractor you choose builds it, with a licence from the council
essexhighways.org, checked 16 November 2026
How long it takes
After preliminary consent the process can take several weeks: the application is on hold until utility ('Stats') details are received, then an estimated timescale is given. Works must be completed within six months of approval (else a new application); Stats requests are valid three months. Notice of Works at least 7 working days before works of up to 3 days.
essexhighways.org, checked 16 November 2026

Apply on the council's website

Sources

Every page we used from Essex County Council's website, checked on 16 November 2026.