Dropped kerbs in Dumfries and Galloway

What Dumfries and Galloway Council charges, its rules for driveways, and where to apply.

Application
£170.25
2026-27
Max. width
5m

Tap a figure for its source, fee year and the date we checked it.

Work out my costs

Dumfries and Galloway's fees

Along the kerb, including the sloping kerbs at each end. Optional.
Crossing width × pavement width, if you know it. Optional.
Anything else?

Dumfries and Galloway Council

A contractor you choose builds it, with a licence from the council

You pay at least£170.25

The council doesn't say whether VAT is included.

Plus

  • Building the dropped kerb: priced by quote
  • Application fee
    £170.25
    • Per dropped kerb permit (Section 56 standard works, initial)
    • VAT not stated
    dumfriesandgalloway.gov.uk, checked 15 November 2026 · Fee year 2026-27
    The council's words
    “Initial fee £170.25”
  • Building the dropped kerb
    Priced by quote

Refunds

The application fee is refunded in full if your application is refused.

dumfriesandgalloway.gov.uk, checked 15 November 2026 · No fee year stated
The council's words
“The permit cost is £170.25, payable by debit or credit card. You must not start work unless we approve your application for a permit. If we do not approve it we will refund the permit cost.”

Other charges the council lists

These may or may not apply to you, so they aren't in the total.

  • Section 56 standard works permit renewal
    £73.90
    • Per renewal of a standard (driveway crossing) Section 56 permit
    • VAT not stated
    dumfriesandgalloway.gov.uk, checked 15 November 2026 · Fee year 2026-27
    The council's words
    “Standard – renewal £73.90”

Dumfries and Galloway's rules

  • Depth of your driveway

    Not published by the council

  • Maximum width

    Council limit: 5m, measured along the kerb, including the sloping kerbs at each end.

    The council's words
    “The standard width permitted for a driveway access is 5 metres (2 transition and 3 bull-nose kerbs).”
    dumfriesandgalloway.gov.uk, checked 15 November 2026

Other layout rules

Any gates must open into the property, not onto the footway or road. A boundary line (kerb) should be installed across the private property / public road boundary during the works. Works within the public road are adopted by the council and must be built to the standard in the permission; a full list of conditions and specifications is issued with the consent.

dumfriesandgalloway.gov.uk, checked 15 November 2026

Driving over the kerb without permission

Fees page: 'Where works have commenced and necessary applications are not made in advance, the initial permissions charge will be doubled.' Permit page: 'You must not start work unless we approve your application for a permit.'

dumfriesandgalloway.gov.uk, checked 15 November 2026

Check your driveway against these rules

From your house to the back of the pavement.
The same width as in the cost calculator above.
Type of crossing
Is your house on a classified road (an A, B or C road)?
Is it in a conservation area, or a listed building?

Enter your measurements to check them against Dumfries and Galloway Council's rules.

  • Depth of your drivewayNot published by the council
  • Maximum widthEnter your width to check

    Council limit: 5m, measured along the kerb, including the sloping kerbs at each end.

    “The standard width permitted for a driveway access is 5 metres (2 transition and 3 bull-nose kerbs).”
    dumfriesandgalloway.gov.uk, checked 15 November 2026

Applying to Dumfries and Galloway

Who builds it
A contractor you choose builds it, with a licence from the council
dumfriesandgalloway.gov.uk, checked 15 November 2026

Apply on the council's website

Sources

Every page we used from Dumfries and Galloway Council's website, checked on 15 November 2026.