Dropped kerbs in Bromley

What London Borough of Bromley charges, its rules for driveways, and where to apply.

Application
£350
Min. depth
4.5m

Tap a figure for its source, fee year and the date we checked it.

Work out my costs

Bromley's fees

Along the kerb, including the sloping kerbs at each end. Optional.
Crossing width × pavement width, if you know it. Optional.
Anything else?

London Borough of Bromley

The council builds it

You pay at least£350

The council doesn't say whether VAT is included.

Plus

  • Building the dropped kerb: priced by quote
  • Application fee
    £350
    • Per application
    • VAT not stated
    bromley.gov.uk, checked 15 November 2026 · No fee year stated
    The council's words
    “Our accounts team will contact you to take the £350 administration fee (non-refundable) by telephone.”
  • Building the dropped kerb
    Priced by quote

Refunds

The application fee is not refunded if your application is refused.

bromley.gov.uk, checked 15 November 2026 · No fee year stated
The council's words
“Our accounts team will contact you to take the £350 administration fee (non-refundable) by telephone.”

Other charges the council lists

These may or may not apply to you, so they aren't in the total.

  • White bar marking repaint
    £150
    • Per repaint
    • VAT not stated
    bromley.gov.uk, checked 15 November 2026 · No fee year stated
    The council's words
    “Any existing worn or faded white bar markings can be repainted at a cost of £150.”

Bromley's rules

  • Depth of your driveway

    The council's minimum is 4.5m.

    The council's words
    “a minimum of 4.5 metres in depth from the back edge of the public footpath/Highway boundary and an unobstructed minimum of 2.4 metres wide throughout”
    bromley.gov.uk, checked 15 November 2026
  • Maximum width (single crossing)

    Council limit: 3m, measured along the kerb.

    The council's words
    “The maximum width of a stand-alone Vehicle Crossover shall consist of 3 metres of flat/lowered kerb with 0.9 metre reducer kerbs either side”
    bromley.gov.uk, checked 15 November 2026
  • Maximum width (single crossing)

    Council limit: 4.8m, measured at your property boundary.

    The council's words
    “with 0.9 metre reducer kerbs either side, making the overall width 4.8 metres at the highway boundary with the property”
    bromley.gov.uk, checked 15 November 2026
  • Minimum width (single crossing)

    Council limit: 2.4m, measured along the kerb.

    The council's words
    “The minimum width of a stand-alone Vehicle Crossover shall consist of 2.4 metres of flat/lowered kerb with 0.6 metre reducer kerbs either side”
    bromley.gov.uk, checked 15 November 2026
  • Minimum width (single crossing)

    Council limit: 3.6m, measured at your property boundary.

    The council's words
    “with 0.6 metre reducer kerbs either side, making the overall width 3.6 metres at the highway boundary with the property”
    bromley.gov.uk, checked 15 November 2026
  • Maximum width (shared crossing)

    Council limit: 3.9m, measured along the kerb.

    The council's words
    “The maximum width of a shared Vehicle Crossover shall consist of 3.9 metres of flat/lowered kerb with a 0.9 metre reducer kerb at the end”
    bromley.gov.uk, checked 15 November 2026
  • Maximum width (shared crossing)

    Council limit: 4.8m, measured at your property boundary.

    The council's words
    “with a 0.9 metre reducer kerb at the end, making the overall width 4.8 metres at the highway boundary with the property”
    bromley.gov.uk, checked 15 November 2026
  • Minimum width (shared crossing)

    Council limit: 2.4m, measured along the kerb.

    The council's words
    “The minimum width of a shared Vehicle Crossover shall consist of 2.4 metres of flat/lowered kerb with a 0.6 metre reducer kerb at the end”
    bromley.gov.uk, checked 15 November 2026
  • Minimum width (shared crossing)

    Council limit: 3m, measured at your property boundary.

    The council's words
    “with a 0.6 metre reducer kerb at the end making the overall width 3 metres at the highway boundary with the property”
    bromley.gov.uk, checked 15 November 2026

Other layout rules

Parking area must be at right angles to the carriageway (no parallel parking), solid and even, at least 4.5m deep and 2.4m wide; 5.5m deep where it sits in front of a garage or a door/escape route. Whole crossover must lie within the applicant's own frontage; 0.6m gap required from a neighbour's crossover (no back-to-back). Verges over 4m deep: presumption to refuse; verges 3-4m deep: grass loss capped at 14.4m² (max width falls from 4.8m to 3.6m). May refuse within 10m of a junction radius. A second crossover needs at least 5m between crossovers (8.6m from the end of the existing crossover to the boundary). Parking area must be bound, permeable or drained within the property, no loose gravel within 1m of the highway, and built before the crossover. Standard crossover surface is concrete block paving.

bromley.gov.uk, checked 15 November 2026

Trees

Arboricultural Officer consulted on every application affecting a street tree; general presumption to refuse where there is a conflict with a street tree or its root protection area. If removal is approved, removal, replacement planting and any CAVAT-based compensation are charged to the applicant. Applications constrained by a tree that was damaged or removed in suspicious circumstances are refused for up to 10 years. On appeal, an investigatory trench may be offered at a fixed cost (outer 30% of the RPA only).

bromley.gov.uk, checked 15 November 2026

Lamp posts and street furniture

No telegraph pole, lighting column or above-ground utility apparatus within 500mm of the crossover edge. Repositioning street furniture or utility apparatus is at the applicant's cost; if the council cannot do it, the applicant must arrange and pay the utility directly. If apparatus can't move, the crossover may be reduced/relocated or refused.

bromley.gov.uk, checked 15 November 2026

Driving over the kerb without permission

Policy para 54: where a driver habitually crosses the footway/verge without a crossover, the council can use s184(1) Highways Act 1980 to insist on a proper crossover. The occupier is first notified and told to stop and to apply; if they persist, further action can include installing preventative measures to restrict access. The crossover page says 'It is illegal to drive over the pavement unless there is a crossover.'

bromley.gov.uk, checked 15 November 2026

When the council says you need planning permission

  • Multiple occupancy dwellings (e.g. flats, maisonettes)
  • Classified road network
  • Front garden hard-standing over 5 square metres not made of porous materials or without provision to direct run-off
bromley.gov.uk, checked 15 November 2026

Check your driveway against these rules

From your house to the back of the pavement.
The same width as in the cost calculator above.
Type of crossing
Is your house on a classified road (an A, B or C road)?
Is it in a conservation area, or a listed building?

Enter your measurements to check them against London Borough of Bromley's rules.

  • Depth of your drivewayEnter your depth to check

    The council's minimum is 4.5m.

    “a minimum of 4.5 metres in depth from the back edge of the public footpath/Highway boundary and an unobstructed minimum of 2.4 metres wide throughout”
    bromley.gov.uk, checked 15 November 2026
  • Maximum width (single crossing)Enter your width to check

    Council limit: 3m, measured along the kerb.

    “The maximum width of a stand-alone Vehicle Crossover shall consist of 3 metres of flat/lowered kerb with 0.9 metre reducer kerbs either side”
    bromley.gov.uk, checked 15 November 2026
  • Maximum width (single crossing)Enter your width to check

    Council limit: 4.8m, measured at your property boundary.

    “with 0.9 metre reducer kerbs either side, making the overall width 4.8 metres at the highway boundary with the property”
    bromley.gov.uk, checked 15 November 2026
  • Minimum width (single crossing)Enter your width to check

    Council limit: 2.4m, measured along the kerb.

    “The minimum width of a stand-alone Vehicle Crossover shall consist of 2.4 metres of flat/lowered kerb with 0.6 metre reducer kerbs either side”
    bromley.gov.uk, checked 15 November 2026
  • Minimum width (single crossing)Enter your width to check

    Council limit: 3.6m, measured at your property boundary.

    “with 0.6 metre reducer kerbs either side, making the overall width 3.6 metres at the highway boundary with the property”
    bromley.gov.uk, checked 15 November 2026
  • Classified (A, B or C) roadTell us if this applies to you
    “Classified road network”
    bromley.gov.uk, checked 15 November 2026

Applying to Bromley

Who builds it
The council builds it
bromley.gov.uk, checked 15 November 2026

Apply on the council's website

Sources

Every page we used from London Borough of Bromley's website, checked on 15 November 2026.